High Output Alternators: PX-627 Series (275
amps)
For use on Buses,
Fire Trucks, Ambulances, and other vehicles that require high amperage output at
engine idle. What's in a PX-6
Kit?
For Proper
Performance, the PX-6 Series (14 Volt) Alternators require use of the Penntex
External Regulator Part Number- PX-5000.
For the PX-635 Series (350 amps) click here.
|
Patented PX-5000
Voltage Regulator |
|
275/260 AMPS |
|
Model PX-627
Tested and Proven |
|
Rotor RPM |
Amps @ 13.5
volts |
|
Cold (SAE) |
HOT (200°F) |
| 1500 |
120 |
97 |
| 2000 |
190 |
167 |
| 2500 |
227 |
204 |
| 3000 |
247 |
225 |
| 3500 |
259 |
238 |
| 4000 |
269 |
247 |
| 4500 |
276 |
253 |
| 5000 |
280 |
257 |
|
|
Special Features:
-
3/8" battery post.
-
Heavy-duty hand wound high output stator.
-
Heavy-duty dual plane balanced rotor.
-
Heavy-duty long life brushes.
-
Heavy-duty bearings with high temperature seals and
grease.
-
Eighteen (18) press fit 60 amp diodes in
PX-627 and PX-635
-
Specially designed patented
heavy-duty regulator which provides higher output ratings; runs cooler
than industry standards.
-
Regulator has ground fault and high voltage protection.
-
Newly designed cooling fan for cooler
operating temperatures.
-
GXL wire is standard in all harnesses.
-
Utilizes OEM belt and OEM mounting configurations - no
brackets needed in most cases.
-
Standard OEM mounting - no brackets needed
in most applications.
-
28 volt and other voltages available.
-
Weight: approximately 32 lbs.
Application
Guide |
|
Printable Brochure |
|
To
figure out the rotor RPM on your vehicle click
here |
© 2006 PennTex Industries, Inc.
