PX-635 Series (350 Amps) (for the 275 Amp PX-6 Click Here)

PX-6Q-350 PX-6S-350 PX-6T-350

Specifically designed for heavy duty, high amperage applications for vehicles that operate at less than highway speeds or idle for prolonged periods of time.

What's in a PX-6 Kit?    PX-6 Brochure   PX-635 Alternator Dimensions   Contact Us

regulator.jpg (5856 bytes)

Patented PX-5000

Voltage Regulator

350/335 AMPS

Model PX-635 Tested and Proven

Rotor RPM

Amps @ 13.5 volts

Cold (SAE)

Hot (200°F)
2000 185 160
2500 250 233
3000 281 266
3500 302 287
4000 317 303
5000 337 323
5500 341 328
6000 350 335

Special Features:

  • 160 to over 200 amps output at engine idle speeds, depending on model: highest output of any alternator in its class.

  • 3/8" battery post.

  • Heavy-duty hand wound high output stator.

  • Heavy-duty dual plane balanced rotor.

  • Heavy-duty long life brushes.

  • Double grease sealed cartridge style front bearing.

  • Heavy-duty bearings with high temperature seals and grease.

  • Eighteen (18) press fit 60 amp diodes.

  • Specially designed patented heavy-duty regulator that provides higher output ratings; runs cooler than industry standards.

  • Regulator has ground fault and high voltage protection.

  • Newly designed cooling fan for cooler operating temperatures.

  • GXL wire is standard in all harnesses.

  • Utilizes OEM belt and OEM mounting configurations - Standard OEM mounting - no brackets needed in most applications.

  • 28 volt and other voltages available.

  • Weight: approximately 32 lbs.

Alternator Dimensional Drawings

PX-6 Brochure            Contact Us

© 2009 PennTex Industries, Inc.  All Rights Reserved