PX-627 Series

For use on Buses, Fire Trucks, Ambulances, and other vehicles that require high amperage output at engine idle.

For Proper Performance, the PX-6 Series (12 Volt) Alternators require use of the Penntex External Regulator , Part Number- PX-5000.

 

px6.jpg (19122 bytes)

 

PX-627S

PX-627Q

275 Amp PX-627T installed on Ford Van 7.3 Diesel in

stock location using stock drive belt. (350 Amp PX-635T also bolts in.)
 

regulator.jpg (5856 bytes)

Patented PX-5000

Voltage Regulator

275 AMPS

Model PX-627 Tested and Proven

Rotor RPM

Amps @ 13.5 volts

Cold (SAE)

Hot (200° F)
1800 155 136
2000 190 167
2500 227 204
3000 247 225
3500 259 238
4000 269 247
4500 276 253
5000 280 257

Special Features:

  • 140 to 190 amps output at engine idle.

  • 3/8" battery post.

  • Heavy-duty hand wound stators with dual 13 gauge copper wire.

  • Heavy-duty dual plane balanced rotor.

  • Heavy-duty brushes with high copper content.

  • Double grease sealed cartridge style front bearing.

  • Heavy-duty larger than industry standards rear needle bearing.

  • Eighteen (18) press fit 50 amp diodes in PX-627 and PX-635. Twelve in the PX-622.

  • Newly designed patented heavy-duty regulator that provides higher output ratings.

  • Regulator has ground fault protection.

  • Newly designed cooling fan for cooler operating temperatures.

  • GXL wire is standard in all harnesses.

  • Standard OEM belt can be used in most applications.

  • Standard OEM mounting - no brackets needed in most applications.

  • 24 volt and other voltages available.

  • Weight: PX-622: 32 lbs. Others: 33 lbs.

 

To figure out the rotor RPM on your vehicle click HERE.

Printable Brochure

©2006 PennTex Industries.